Tibloch 720: width 60mm, 75 g/m, opening of +- 9mm, 100% inox Spuntech.
Large openings to optimize the cold airflow, for a better quenching efficiency, without marking the glass.

Tibloch 100: width 100mm, 200 g/m, very precise squared openings of 2,5 mm; 100% inox Spuntech.
Very small openings for thin or low bending radius glass parts.

Removes the risk of marking on the hot glass.

Tibsleeve inox

• Ideal for conveyor rollers.
• Diameters from 1.5 to 85mm.
• Long lifetime.
• Great porosity to maximize air exchange and minimize clogging.

Tibtape: stainless steel contact tapes for the glass industry

Tibtape ribbons have two different sides:

• One side is designed to increase the lifetime.
• The second side is more flexible and limit glass marking risks.

Selvedges have been added to ease the positioning of the ribbon especially in low bending radius areas.

Tibtape 45-20

• 45mm width.
• 20mm wide central reinforcement.
• 100% Stainless steel.

Tibtape 55-20

• 55mm width.
• 20mm wide central reinforcement.
• 100% Stainless steel.

Other stainless steel tapes

Minimum width: 5mm. Please contact us for more information.

High temperature resistant flexible stainless steel felts:

• Available in different thickness or densities.
• Reinforced by a central structure.
• Applications: suction cups for the glass industry, thermal protection layer.

Tibfelt 2,8 - 1500

• Areal weight: 1500 g/m².
• Sold with a width of 1500mm and 2.8mm thickness.
• Stainless steel.

Knitted contact fabric for hot glass process made from stainless steel micro fibers:

• Flexible, soft and very resistant.
• 100% stainless steel micro fibers.
• Resistant to 700°C.
• Enhance the glass optical quality during the forming or tempering process.
• Applications: glass industry and more specifically for the bending process.
• Cost efficient.

Moldtech 7

• 100% Stainless steel.
• Weight: 1100g/m².
• Applications: forming of mass market of heavy or technical glass with bending radius constraints.

TIBTECH proposes round or square stainless steel braids:

• High temperature resistant (700°C).
• Exist in hollow or full version.
• Applications:
• High temperature joints.
• Gripping and transportation for hot glass, aluminium or other metals deformable if hot.
• Roller conveyors of flat glass or aluminium parts.