TIBTECH innovations

Menu

Metallic or High temperature withstanding stranded wires, fibers, slivers or spun yarns

    stainless steel or FeCrAlloy long stretch-broken fibers spun for enhanced performances

  • SPUNTECH: 100% 316L
    SPUNTECH 100% stainless steel fiber spun yarn main available counts : Nm 6/2, Nm 11,5/2, ou Nm 15/2.
  • TIBTAL: 100% FeCrAl
    Tibtal: high temperature withstanding alloys for gaz-burners or catalyse. main available counts : Nm 3/2 ou Nm 5/2.
  • Note : the stainless steel density being around 7.8, a stainless steel spun yarn with a given count will look twice thinner than a synthetic yarn with the same count (its density is usually below 2.
    filés de fibres inox TIBTECH

    Stainless steel stretch broken fiber sliver or wick

  • Stretch brocken stainless steel fiber slivers
  • Fibers sizes : 8, 12, 22 or 30µm
  • Usual counts : 2,5g/m or 8,5g/m
  • Usually sold in 1kg vacuum package wafer
  • Rubans de fibres

    Metallic fibers or pulps stainless steel

  • Fibers with specific lengths: short or long fibers
  • Very short fibers for conductive directional electrical charge
  • Bourre fibres inox TIBTECH

    Tungsten multi-filaments for heating, cutting or high temperature applications :

    These thin heating yarns are manufactured from metal complex which includes Tungsten.

    These yarns are characterized by :

    • High mechanical resistance especially at high temperatures
    • Maximum melting point temperature around 3400°C
    • Very low thermal expansion factor

    • Standard diameter : 25 microns
      minimal quantity 1 sall spool of +- 16km
    Bobine tungstene

    Ultrafine Stainless steel wires or stranded wires:

    Ultrafine Stainless steel wires or stranded wires Stainless steel 316L or EN1.4404.

    diameter available in single or stranded wires of 2,3 or 9 ends :
    Prices are reduced for large quantities.

    • 30 ou 35 microns
      30 or 35 microns ultrafine wire from stock, minimum quantity one spool (+-1,3kg)
    • 35 microns , 35X3, 35X9
    • 30 microns , 30X3 , 30X9
    • stranded or twisted wires from stock or on order, minimum order quantity 5km on king spools

    Possibility to assemble or twist these multifilament wires together with a polyester or Para-aramid thread: minimum launch quantity 10km

    Ultrafine copper alloy based wires:


      CU-ZN: Ultrafine Wires or stranded wires based on Tin coated wire:

      • base 40 microns
        available in single or stranded wires diameter, from 3 to 9 ends :
      • 40X3, 40X9
        stranded wires from stock or on order, minimum order quantity 5km :

      • base 80 microns
        80 microns ultrafine wire from stock, minimum quantity one spool (+-1,0kg)
      • 80 microns , 80X3 , 80X9
        stranded wires from stock or on order, minimum order quantity 5km :


      Possibility to assemble or twist these multifilament wires together with a polyester or Para-aramid thread: minimum launch quantity 10km

      CU-AG: Ultrafine wires or stranded wires based on silver plated copper alloys:


      available single or stranded wires diameter, from 3 to 9 ends :

      • 50 microns , 50X3, 50X9
      • on stock or on order, minimum order quantity 5km :


      Possibility to assemble or twist these multifilament wires together with a polyester or Para-aramid thread: minimum launch quantity 10km

      CCS: CLADS CU: Mechanically reinforced ultrafine wires or stranded wire based on Nickel plated copper alloys:


      available diameters in mono, 7 or 19 stranded wires :

        Pleas question us : Minimum industrial quantities above 300 kg per launch:


Retour en haut de page
©2018 TIBTECH innovations
Mail: info@tibtech.com
Tél : +33 (0)3 20 85 10 73