TIBTECH innovations

Menu

Metallic or High temperature withstanding stranded wires, fibers, slivers or spun yarns

    Tungsten multi-filaments for heating, cutting or high temperature applications :

    These thin heating yarns are manufactured from metal complex which includes Tungsten.

    These yarns are characterized by :

    • High mechanical resistance especially at high temperatures
    • Maximum melting point temperature around 3400°C
    • Very low thermal expansion factor

    • Standard diameter : 25 microns
      minimal quantity 1 sall spool of +- 16km
    Bobine tungstene

    Ultrafine Stainless steel wires or stranded wires:

    Ultrafine Stainless steel wires or stranded wires Stainless steel 316L or EN1.4404.

    diameter available in single or stranded wires of 2,3 or 9 ends :
    Prices are reduced for large quantities.

    • 30 ou 35 microns
      30 or 35 microns ultrafine wire from stock, minimum quantity one spool (+-1,3kg)
    • 35 microns , 35X3, 35X9
    • 30 microns , 30X3 , 30X9
    • stranded or twisted wires from stock or on order, minimum order quantity 5km on king spools

    Possibility to assemble or twist these multifilament wires together with a polyester or Para-aramid thread: minimum launch quantity 10km

    Ultrafine copper alloy based wires:


      CU-ZN: Ultrafine Wires or stranded wires based on Tin coated wire:

      • base 40 microns
        available in single or stranded wires diameter, from 3 to 9 ends :
      • 40X3, 40X9
        stranded wires from stock or on order, minimum order quantity 5km :

      • base 80 microns
        80 microns ultrafine wire from stock, minimum quantity one spool (+-1,0kg)
      • 80 microns , 80X3 , 80X9
        stranded wires from stock or on order, minimum order quantity 5km :


      Possibility to assemble or twist these multifilament wires together with a polyester or Para-aramid thread: minimum launch quantity 10km

      CU-AG: Ultrafine wires or stranded wires based on silver plated copper alloys:


      available single or stranded wires diameter, from 3 to 9 ends :

      • 50 microns , 50X3, 50X9
      • on stock or on order, minimum order quantity 5km :


      Possibility to assemble or twist these multifilament wires together with a polyester or Para-aramid thread: minimum launch quantity 10km

      CCS: CLADS CU: Mechanically reinforced ultrafine wires or stranded wire based on Nickel plated copper alloys:


      available diameters in mono, 7 or 19 stranded wires :

        Pleas question us : Minimum industrial quantities above 300 kg per launch:


SPUNTECH or TIBTAL : stainless steel of FeCrAl fibers spun yarns

Metallic stretch and long fibers spun for enhanced performances :
  • SPUNTECH: stretch-broken stainless steel fibers spun yarns: available with different counts and sizes.
    • Main available counts : Nm 6/2, Nm 11,5/2, Nm 11,5/3 ou Nm 15/2.
  • TIBTAL: stretch-broken fiber spun yarns for hot gaz filtration or catalytic applications: available with different counts and sizes.
    • Main available counts : Nm 0,5, Nm 1 Nm 1,3 Nm 3/2 ou Nm 5/2.

Note : the stainless steel density is around 7.8. As a result, a stainless steel yarn with a given count will be far thinner than a synthetic yarn with the same count (its density is usually below 2).
filés de fibres inox TIBTECH

Stainless steel, copper or other alloy fibers

  • Fibers with specific lengths: short or long fibers
  • Special alloy fibers
  • Very short fibers for conductive directional electrical charge
Bourre fibres inox TIBTECH

Stainless steel sliver or wick

Stretch broken fibers :
  • Stretch brocken stainless steel fiber slivers (80-180mm) or short, for 3 cylinder spinning process :
    • Fibers sizes : 8, 12, 22 or 30µm
    • Usual counts : 2,5g/m or 8,5g/m
    • Usually sold in 1kg vacuum package wafer
Wicks :
  • Usual counts : 2,5g/m to 10g/m.
Rubans de fibres

Retour en haut de page
©2018 TIBTECH innovations
Mail: info@tibtech.com
Tél : +33 (0)3 20 85 10 73