TIBTECH innovations

Menu

insulated heating or antistatic flexible yarns or ribbons

The insulated heating yarns Thermotech "I" (with high temperature resistant insulation)

Properties:
  • Very fine and flexible due to its micro fibers composition.
  • Its relatively small thickness allows the optimization of the thickness of intermediate resin layers, and therefore the weight
  • Maximum electric tension of 380 volts.
  • Maximum temperature is 230°C, which can be withstood thanks to high performance coating (PTFE, MFA, PFA or equivalent).
  • Other properties are similar to the ones of the Thermotech "N".


Flexible PTFE (PFA or MFA) insulated heating wires THERMOTECH cover a complementary resistivity range to the CONDUCTIB yarns; they have an excellent mechanical and thermal cycles withstanding ability:

  • < CONDUCTIB insulated wires are available in the following resistivity range:

  • 3,6 Ohms/m, 4,6 Ohms/m, 7 Ohms/m, 14 Ohms/m, 23 Ohms/m, 30 Ohms/m

Link to the Thermotech wires chart

Link to the graph of the temperature of the non-insulated wires

Link to the graph of the temperature of the insulated wires

Thermotech isolé

The Conductib conductive yarns

They are complementary to the THERMOTECH heating yarns family , and characterized by:

  • High conductivity.
  • Great flexibility.
  • These yarns are designed to transfer electric power or data within the flexible structure.
  • High temperature resistant (230°C) insulated version Conductib "I" available.


Flexible isolated CONDUCTIB yarns are used in conductive, deicing or heating applications, and more specially with high temperature , up to 230°C, constraints!
  • < CONDUCTIB insulated wires are available in the following resistivity range:

  • 0,06 Ohms/m, O,11 Ohms/m, 0,19 Ohms/m, 0,35 Ohms/m, 0,48 Ohms/m, 1,0 Ohm/m
,
Insulated Conductib

    The non-insulated heating Thermotech "NW" yarns (protected by a binder)

    Thermotech NW are Thermotech N wires protected by an outside protecting synthetic thread layer that allow easier subsequent textiles of RFID processes:
    They remain conductive on surface and allow cross conductivity in cas of yarns crossing in weaving, knitting or embroidery.
TIBTECH Thermotech NW30 avec guipage de protection

Condustretch and Thermostretch: elastic narrow ribbons with integrated conductive or heating wires

Narrow elastic ribbon Condustretch are perfectly adapted to sensor connexions, data or energy transfers within washable or composite parts:
  • Can help to pre-position the connections within thermoplastic flat parts which will later undergo thermoforming or press-forming.
  • A version exists with several conductive yarns in parallel which makes a data bus elastic in all directions (contrary to "flex" electronics circuits).
  • They are well adapted to sport or medical clothes or for robotics.
  • Specific versions with controlled elongation are adapted to strain monitoring.
  • Connection within washable clothes is one of the main applications of the Condustretch.

Thermostretch heating elastic ribbons are similar to Condustretch but adapted to heating applications:
  • "N" non insulated or "I" insulated versions exist.
  • Designed for low voltage (3 to 24 volts).
  • Can easily be integrated within clothes or other flexible heating structures.
TIBTECH Thermostretch TIBTECH condustretch isolé ultra fin TIBTECH condustretch-duo

Retour en haut de page
©2018 TIBTECH innovations
Mail: info@tibtech.com
Tél : +33 (0)3 20 85 10 73